Inquiries
JPENCN
Products & Solutions

Products & Solutions Top

LIOCREATE® ™ SSFX Series SS FX Series

It has excellent performance on base materials such as treated polypropylene and treated polyethylene. A two-component reactive screen ink with superior film flexibility compared to the SS16-000 series.

Dry curing method 2-component curing type
Packing 1kg, 5kg
Purpose/Function Tubes, bottles, meter panels, amusement, metal, displays, nameplates, packages, cards, plastic moldings, insulation
Base material AC, PC, ABS, PVC, untreated PET, treated PET, treated PP, treated PE, painted board, paper, synthetic paper
Base material (other) FPC raw materials such as treated polypropylene, treated polyethylene, polyester sheets, polyimide, etc.
Printability Leveling properties, curing properties, high speed printing properties
Post-processability Recoatability, punchability
Resistance Heat resistance, hot water-based resistance, weather resistance
Paint film strength Tough coating, flexibility, high elongation, stretchability, bendability
Chemical Resistance Acid resistance, alkali resistance, oil resistance
Electrical properties Insulation
Characteristics (other)
  • After evaporation and drying, the reaction progresses over time and after one day of storage at room temperature, it exhibits excellent performance in terms of impact resistance, oil resistance, solvent resistance, gloss, etc.
  • It firmly adheres to a wide range of plastic substrates, and has excellent resistance to cracking and scratching of ruled lines when creasing.
    It also has UV offset ink suitability (adhesion).
Finish, texture, appearance effect Semi-gloss (semi-gloss)
setting color 611T white, 600T medium
diluting solvent
  • S-799 solvent (standard)
  • S-787 solvent (slow)
Heat dry curing conditions 60℃×10 minutes
Auxiliary agents, additives, cleaning solvents, etc. SS Plate Cleaner ECO Series...A plate cleaning agent for screen printing that does not fall under organic regulations or the PRTR law. SD is the standard type, and QD is even faster drying.
How to use ink & precautions
  • Mixing conditions
    Immediately before printing, mix SS UR150B additive at a ratio of 5% to 100% ink, adjust the viscosity to the appropriate level with a diluting solvent, and print.
  • Pot life (usable time)
    It depends on the temperature after mixing the hardening agent, but it takes about 6 to 8 hours at room temperature (25℃) in a closed state. Please check the usage amount during the available usage time and adjust only the amount as necessary.
    SS UR150B additives react with moisture in the air, so store them tightly closed immediately after use.
Requests for use
  1. This document is an example of our test data, and the properties obtained will vary depending on printing/processing conditions, base materials, etc., and are not guaranteed.
    Before using the product, please carefully check its intended use.
  2. Before handling this product, be sure to read the "Product Safety Data Sheet" and handle with care.
  3. If you wish to export this product overseas, please be sure to check with us.

Print

Inquiries

TOYO INK CO., LTD. Marketing Division Business Planning Department

TEL:+81-3-3272-7693

TOYO INK CO., LTD.