LIOCREATE® ™ SSBTC Series SS BTC Series

It has good adhesion to untreated polypropylene substrates. This is a screen ink that is especially suitable for battery cases such as automobiles.

Dry curing method

Evaporative drying type

Packing

1kg

Purpose/Function

Battery cases, writing receipts, displays, nameplates, packages, cards, plastic moldings, insulation

Base material

AC, PC, ABS, PVC, treated PET, untreated PP, treated PP, treated PE, painted board, paper, synthetic paper

Base material (other)

Untreated polypropylene battery case
Can be used for all other untreated polypropylene.

Printability

Leveling property, high speed printing property

Post-processability

Recoatability, punchability

Resistance

Heat resistance, hot water-based resistance, weather resistance

Paint film strength

flexibility

Chemical Resistance

Acid resistance, alkali resistance, alcohol resistance, gasoline resistance

Electrical properties

Insulation

Characteristics (other)

The durability (acid resistance, hot water-based) of the battery case can be maintained.
Excellent matte feel (almost no gloss)

Finish, texture, appearance effect

mat

setting color

182 red, 193S red, 221M yellow, 262M yellow, 361 indigo, 391 indigo, 572 peony, 791 grass B, 911 ink, conch 611 white, medium

diluting solvent

S-407 solvent (standard)
S-408 solvent (slow)

Heat dry curing conditions

Dry at room temperature for 20-30 minutes (dry to the touch)

Auxiliary agents, additives, cleaning solvents, etc.

SS Plate Cleaner ECO Series...A plate cleaning agent for screen printing that does not fall under organic regulations or the PRTR law. SD is the standard type, and QD is even faster drying.

Physical properties

Test piece: Hand-held untreated PP sheet
Test ink: SS BTC182 red
Screen: 270 mesh (Tetron)
Drying: 60℃ x 10 minutes

Evaluation item	Test method	result
Good adhesion	1mm spacing base, cellophane tape peeled off	100／100
Pencil hardness	Mitsubishi Uni 45°	H.B.
scratching	Check the degree of peeling by scratching the cured film with your fingernail.	Good
Acid resistance, hot water-based resistance	Drip 40% sulfuric acid, leave at 60°C for 25 hours, then soak in 50°C warm water for 3 hours, observe discoloration and whitening of the dripping area.	Good

Requests for use

This document is an example of our test data, and the properties obtained will vary depending on printing/processing conditions, base materials, etc., and are not guaranteed.
Before using the product, please carefully check its intended use.
Before handling this product, be sure to read the "Product Safety Data Sheet" and handle with care.
If you wish to export this product overseas, please be sure to check with us.

Inquiries

TOYO INK CO., LTD. Marketing Division Business Planning Department

TEL:+81-3-3272-7693

TOYO INK CO., LTD.