Inquiries
JPENCN
Products & Solutions

Products & Solutions Top

LIOCREATE® ™ SS25 Series SS 25-000 Series

A two-component reactive screen ink that has excellent adhesion to a wide range of materials. The cured film has excellent flexibility, impact resistance, chemical resistance, oil resistance, solvent resistance, gloss, etc.

Dry curing method 2-component curing type
Packing 1kg
Purpose/Function Tubes, bottles, glass, metals, displays, nameplates, packages, plastic moldings, insulation
Base material AC, PC, ABS, PVC, treated PET, treated PP, treated PE, painted board, paper, glass, synthetic paper
Base material (other) Metal, metal painted plate, etc.
Printability Leveling properties, curing properties, high speed printing properties
Post-processability Recoatability
Paint film appearance Glossy, non-yellowing
Paint film properties Abrasion resistance
Resistance Heat resistance, hot water-based resistance, weather resistance
Paint film strength Tough coating, high hardness
Chemical Resistance Acid resistance, alkali resistance, alcohol resistance, solvent resistance, oil resistance, gasoline resistance, sunscreen resistance
Electrical properties Insulation
Characteristics (other)
  • It has excellent physical properties for a wide range of substrates, including metals such as aluminum, stainless steel, and chrome plated plates, as well as melamine/epoxy coated plates, glass, nylon, and polyester.
  • Excellent fine print suitability and good reproducibility of fine lines and punched characters.
Finish, texture, appearance effect Gloss (glossy)
setting color 141 red, 152 red, 171 red, 515S vermillion, 516 vermilion, 237 yellow, 262 yellow, 391 indigo, 791 grass B, 821 purple, 611 white, conch 611 white, 911 sumi, medium
diluting solvent
  • S-598 solvent (standard)
  • S-823 solvent (slow)
hardening agent Hardener: SS EH compound 1K
Heat dry curing conditions 80℃×20 minutes (standard)
*The standard drying time is 80℃ x 20 minutes, but the temperature and degree of curing are shown below.
*〇 indicates the state where the film is hardened
temperature/time 3 minutes 5 minutes 10 minutes 15 minutes 20 min
80℃ × × × △ ○
90℃ × △× △ ○ ○
100℃ × △ ○ ○ ○
110℃ △× △ ○ ○ ○
120℃ ○ ○ ○ ○ ○
Auxiliary agents, additives, cleaning solvents, etc. SS Plate Cleaner ECO Series...A plate cleaning agent for screen printing that does not fall under organic regulations or the PRTR law. SD is the standard type, and QD is even faster drying.
How to use ink & precautions
  • Color ink formulation
    ・Ink: 80%
    ・SS EH compound 1K: 20%
  • Medium ink formulation
    ・Medium: 70%
    ・SS EH compound 1K: 30%
    ・Additive 500: 1%
Mix and stir well at the above ratio immediately before use.
If there is too much or too little SS EH Compound 1K, curing will be incomplete and good resistance will not be obtained, so please measure accurately.
The usable time (pot life) varies depending on the temperature after mixing the curing agent, but it is approximately 6 to 8 hours at room temperature (25°C) in a closed state.
Please check the usage amount within the usable time and prepare only the required amount.
  • Be sure to degrease glass substrates before printing.
    Also, considering water-based, use 3% SS 25 water resistance additive and dry at 120℃ for 10 to 15 minutes.
  • When overprinting, please make sure the base color is semi-hardened.
    Once the base is completely cured, it will not adhere.
  • Please do not use tint colors made with 152 Beni as they will discolor if dried at high temperatures (130℃ x 5 minutes).
  • The ink, SS EH Compound 1K, and Additive 500 will gradually solidify if there is air circulation, so please store them tightly closed immediately after use.
  • When printing on polyethylene or polypropylene containers that have been subjected to frame treatment, excessive frame treatment (which increases the surface tension of the base material) may lead to a decrease in water-resistant adhesion, so check the frame treatment conditions in advance. please do it.
Physical properties Test piece: treated polyethylene sheet
Test ink: SS 25911 Sumi + SS EH compound 1K (20%)
Screen: 270 mesh (nylon)
Drying: 80℃ x 20 minutes
Evaluation: 24 hours after drying
Item Test method result
Good adhesion 1mm interval base grain cross cut Good
Pencil hardness Mitsubishi Uni 45° 2H
Friction resistance 41lbs 40 times lab tester No abnormality
Eriksen 8mm medium crack No abnormality
bending 1.5mm medium crack No abnormality
Water resistance Soaked in room temperature water (approximately 20℃) for 72 hours No abnormality
Salt water-based resistance Soaked in salt saturated aqueous solution for 72 hours No abnormality
Boiling resistance Boil at 90℃ and soak for 8 hours No abnormality
Detergent resistance Soaked in nonionic 10% aqueous solution for 72 hours No abnormality
Acid Resistance 10% hydrochloric acid, aqueous solution immersion Good
Alkali Resistance 10% caustic soda, soaked in aqueous solution Good
Solvents Soaked in toluol for 72 hours Slight bleed
Soaked in ethanol for 72 hours No abnormality
Sakusan ethyl soaked for 72 hours Slight bleed
Oil resistance Machine oil, soaked for 72 hours No abnormality
Cold resistance Leave in the freezer for 72 hours No abnormality
Requests for use
  1. This document is an example of our test data, and the properties obtained will vary depending on printing/processing conditions, base materials, etc., and are not guaranteed.
    Before using the product, please carefully check its intended use.
  2. Before handling this product, be sure to read the "Product Safety Data Sheet" and handle with care.
  3. If you wish to export this product overseas, please be sure to check with us.

Print

Inquiries

TOYO INK CO., LTD. Marketing Division Business Planning Department

TEL:+81-3-3272-7693

TOYO INK CO., LTD.