Inquiries
JPENCN
Products & Solutions

Products & Solutions Top

LIOCREATE® ™ SS16 Series SS 16-000 Series

A two-component reactive screen ink that has excellent physical properties for a wide range of substrates such as treated polypropylene and treated polyethylene.

Dry curing method 2-component curing type
Packing 1kg
Purpose/Function Bottles, meter panels, glass, amusement, touch panels, metals, displays, nameplates, packages, cards, plastic moldings, insulation
Base material AC, PC, ABS, PVC, untreated PET, treated PET, treated PP, treated PE, painted board, paper, synthetic paper
Base material (other) Polyester, acrylic, polycarbonate, FRP, PBT, urethane/epoxy coated board, stainless steel, etc.
Printability Leveling properties, curing properties, high speed printing properties
Post-processability Recoatability, punchability
Paint film appearance Glossy, non-yellowing
Paint film properties Abrasion resistance
Resistance Heat resistance, hot water-based resistance, weather resistance
Paint film strength Tough coating, flexibility
Chemical Resistance Acid resistance, alkali resistance, alcohol resistance, solvent resistance, oil resistance, gasoline resistance, sunscreen resistance
Electrical properties Insulation
Characteristics (other) After evaporation and drying, the reaction progresses over time and after one day of storage at room temperature, it exhibits excellent performance in terms of impact resistance, oil resistance, solvent resistance, gloss, etc.
Finish, texture, appearance effect Gloss (glossy)
Printing conditions 121M red, 141 red, 182 red, 191 red, 515S vermilion, 516 vermilion, 219 yellow, 221 yellow, 263 yellow, 037 indigo, 391 indigo, 791 grass B, 821 purple, 611 white, 911 ink, medium
diluting solvent S-799 solvent (standard)
S-787 solvent (slow)
Heat dry curing conditions 60℃×10 minutes (standard)
Auxiliary agents, additives, cleaning solvents, etc.
  • SS Plate Cleaner ECO Series------A plate cleaning agent for screen printing that does not fall under organic regulations or the PRTR law. SD is the standard type, and QD is even faster drying.
How to use ink & precautions
  • Mixing conditions
    Immediately before printing, mix SSUR110B additive at a ratio of 10% to 100% ink, adjust the viscosity to the appropriate level with a diluting solvent, and print.
  • Pot life (usable time)
    It depends on the temperature after mixing the hardening agent, but it takes about 6 to 8 hours at room temperature (25℃) in a closed state. Please check the usage amount during the available usage time and adjust only the amount as necessary.
  • SS UR110B additive reacts with moisture in the air, so store it tightly closed immediately after use.
  • When printing on polyethylene or polypropylene containers that have been subjected to frame treatment, excessive frame treatment (which increases the surface tension of the base material) may lead to a decrease in water-resistant adhesion, so check the frame treatment conditions in advance. please do it.
  • To improve the reproducibility of fine lines and fine letters, add 10 to 20% of SS16 Osokuchi compound.
Requests for use
  1. This document is an example of our test data, and the properties obtained will vary depending on printing/processing conditions, base materials, etc., and are not guaranteed.
    Before using the product, please carefully check its intended use.
  2. Before handling this product, be sure to read the "Product Safety Data Sheet" and handle with care.
  3. If you wish to export this product overseas, please be sure to check with us.

Print

Inquiries

TOYO INK CO., LTD. Marketing Division Business Planning Department

TEL:+81-3-3272-7693

TOYO INK CO., LTD.