Inquiries
JPENCN
Products & Solutions

Products & Solutions Top

Functional ink series SS Lottery F Silver

SS Lottery F Silver 10K is a high hiding silver ink for scratch lottery. It has the highest level of concealment and smooth removability in the industry.

Dry curing method Evaporative drying type
Packing 10kg
Purpose/Function Scratch card, display, nameplate, package, book, insulation
Base material PC, ABS, PVC, treated PET, painted board, paper, synthetic paper
Printability Leveling property
Post-processability Punching property
Paint film appearance high brightness
Resistance Heat resistance, hot water-based resistance, weather resistance
Paint film strength Flexibility, bendability
optical properties Hiding property, light blocking property
Chemical Resistance Alcohol resistance
Electrical properties Insulation
Characteristics (other)
  • It has the highest level of concealment performance in the industry and sufficiently hides hidden characters.
  • The exterior is a bright silver color.
  • Shavings are hard to come out and a smooth peeling feeling can be obtained.
  • It has good suitability for cylinder press machines.
Finish, texture, appearance effect mat
diluting solvent
  • S407 Solvent (Standard)
  • S408 Solvent (slow)
Heat dry curing conditions
  • Natural drying (25℃): Approximately 30 to 40 minutes
  • Hot air drying (about 60℃): about 5 minutes
Auxiliary agents, additives, cleaning solvents, etc. SS Plate Cleaner ECO Series...A plate cleaning agent for screen printing that does not fall under organic regulations or the PRTR law. SD is the standard type, and QD is even faster drying.
Physical properties Test piece: hand-held offset print
Test ink: SS Lottery F Silver 10K + S407 Solvent (20%)
Screen: 250 mesh (nylon)
Drying: 60℃×10 minutes
Item Test method result
Concealability (OD) Print on transparent PET film and measure transmission density 2.7
dryness Determine the degree of dirt on the blank paper after leaving it for 2 minutes using a grind meter Good
Blocking resistance Determine the degree of ink adhesion on the back side of paper/ink side at 40°C, 80%RH, 500g/ cm2 load, and after standing for 18 hours. Good
Peelability Judgment after being left at room temperature for 24 hours and at 50°C, 80%RH for 72 hours very good

*Results will vary greatly depending on the substrate, printing inks, release varnish, printing conditions, drying conditions, post-printing storage conditions, etc.
Please conduct sufficient confirmation tests before use.
Requests for use
  1. This document is an example of our test data, and the properties obtained will vary depending on printing/processing conditions, base materials, etc., and are not guaranteed.
    Before using the product, please carefully check its intended use.
  2. Before handling this product, be sure to read the "Product Safety Data Sheet" and handle with care.
  3. If you wish to export this product overseas, please be sure to check with us.

Print

Inquiries

TOYO INK CO., LTD. Marketing Division Business Planning Department

TEL:+81-3-3272-7693

TOYO INK CO., LTD.