Silver coated copper type (development product)
- Cheaper and more stable price compared to silver paste, yet exhibits the same high conductivity.
| Functions |
High conductivity, economical |
| Application example |
Typical Conductive Printing Applications |
| Applicable base material |
Let us talk to you. |
| Representative characteristics |
Characteristics table (reference value)
| Product name |
Silver coated copper type (development product) |
Remarks |
| hardening type |
heat curing |
Recommended: 135℃ x 30 minutes |
| Appearance |
Copper color with metallic luster, paste-like |
|
| Viscosity (Pa・s@25℃) |
about 10 |
E-type viscometer/5rpm |
| Volume resistivity (Ω・cm) |
8 x 10-⁵ |
Drying at 135℃ x 30 minutes |
| Printing method |
flat screen |
|
*The above values are representative values and are not guaranteed values.
|
| How to use ink and precautions |
- Please stir this conductive paste thoroughly before use.
- Please store refrigerated (below 0℃ to 10℃).
- If the paste viscosity is high and printing is difficult, add a solvent ofbutyl diglycol acetate or ethyldiglycolacetate within 1.0%. Please note that excessive addition will impair print reproducibility such as deterioration of linearity and thickening of lines.
- We recommend using a ketone solvent to clean the plate. Cleaned with our product "S 705 Solvent 2KC (Cyclohexanone)" and wiped with "VC102 Solvent C (MEK)".
|
| Requests for use |
- This material is an example of our experimental data and cannot be guaranteed as the properties obtained will vary depending on printing/processing conditions, base materials, etc. Before using the product, please carefully check its intended use.
- Before handling this product, be sure to read the "Product Safety Data Sheet" and handle with care.
- If you are exporting this product overseas, please be sure to check with us.
|
