Inquiries
JPENCN
Products & Solutions

Products & Solutions Top

LIOTONE R Series FD237 LIOTONE LV

The FD237 LIOTONE LV is a UV printing system that replaces the traditional etching method and allows you to easily obtain special uneven patterns that look like etching using only screen printing. The unique texture and three-dimensional effect give new design and design to printed matter. In addition, since there is no need for a complicated etching process, it improves productivity and realizes environmental measures such as no waste liquid treatment. FD237 LIOTONE low viscosity.

Dry curing method UV curing type
Packing 1㎏、5㎏
Purpose/Function Tubes, bottles, pseudo-etching, amusement, thickness, high definition, metal, displays, nameplates, packages, plastic moldings, books, insulation
Base material PC, ABS, PVC, treated PET, treated PP, treated PE, painted board, paper, synthetic paper
Printability hardenability
Post-processability Recoatability, punchability
Paint film properties Abrasion resistance
Resistance Heat resistance, hot water-based resistance, weather resistance
Paint film strength Tough coating, flexibility, high hardness
optical properties light diffusivity
Chemical Resistance Acid resistance, alkali resistance, alcohol resistance, solvent resistance, oil resistance, gasoline resistance, sunscreen resistance
Electrical properties Insulation
Finish, texture, appearance effect Rough
Auxiliary agents, additives, cleaning solvents, etc.
Product name Intended use how to use
FDSS 330 Regiuser Usually not required. Added only when it is necessary to particularly reduce viscosity. Contains within 5%
TU240 FDSS series Added for light coloring Contains within 5%
FD237 HVW LIOTONE Adjusting the etching effect
Added to compensate for the whiteness of the paint film		 Mix as desired
How to use ink & precautions
FD237 LIOTONE（FD237 LIOTONE LV)
Standard UV conditions
  • 120W/cm×10m/min (one metal halide lamp)
mesh used
  • Select as appropriate depending on the etching effect
  • High mesh (250 to 350 mesh, etc.) will give you a fine pattern, and low mesh (50 to 200 mesh, etc.) will give you a coarse pattern.
Adjusting the effect
  • The FD237 LIOTONE (LV) and FD237HVW LIOTONE mixing ratio allows the etching effect to be adjusted.
  • If you want to emphasize the etching effect or emphasize the whiteness of the printed surface FD237HVW LIOTONE add more to reduce the fluidity.
against metal
  • For printing on metal, please use our metal size paint S25FD.
About cleaning
  • Please use the SS plate cleaner ECO series.
Physical properties Ink: FD237 LIOTONE
Test panel: Vinyl-treated vapor deposited PET laminated paper
Screen used: 300 mesh nylon
Curing condition: 120 W/cm 1 metal halide lamp × 10 m/min
Evaluation item Evaluation details judgement
Adhesion test After 1.0mm cross cut, 18mm sellotape peeled off 100/100
bending test 180° outward bend Good
pencil hardness test mitsubishi pencil uni 3H
Friction resistance test Painted surface/painted surface with 4 pounds x 40 times using Sutherland Lab Tester Good
Light resistance test Presence or absence of discoloration after 100 hours of exposure using a fedometer No discoloration
water-based test Appearance after soaking in tap water for 24 hours No abnormality
Moisture resistance test Appearance after 40℃ x 80%RH x 7 days No abnormality
Alcohol resistance test Appearance after coating with 95% ethanol for 30 minutes No abnormality
Requests for use
  1. This document is an example of our test data, and the properties obtained will vary depending on printing/processing conditions, base materials, etc., and are not guaranteed.
    Before using the product, please carefully check its intended use.
  2. Before handling this product, be sure to read the "Product Safety Data Sheet" and handle with care.
  3. If you wish to export this product overseas, please be sure to check with us.

Print

Inquiries

TOYO INK CO., LTD. Marketing Headquarters

TEL:+81-3-3272-7693

TOYO INK CO., LTD.